The INFINITY Graphite® has been designed with modern homes in mind. Taking the ever-popular INFINITY A26 and transforming its aesthetic with a new, hand-selected shade of dark grey, the Graphite® unit allows you to enjoy endless hot water while maintaining minimal design disruption to your home’s exterior.
This model also meets Light Reflectance Value (LRV) guidelines, providing you with the total confidence and peace of mind that you’re installing the right product for your home – no matter where you live in New Zealand.
- external residential applications only
- mains and medium pressure systems
Hard or acidic water will need to be treated to use this product.
- as a spa or swimming pool heater
- for hydronic applications
- as a gas boost for solar connections1
1 Temperature cannot be set high enough, use our HD models insstead
Available for Natural Gas or LPG, specify at the time of purchase
Input: 16.3-199 MJ/h
Output: 44.5 kW
Fitted as standard. Frost protection operates automatically, as long as the appliance is connected to the electrical power supply, by activating when the temperature inside the unit drops below 3.5 °C, and turns off once the temperature inside the unit reaches 7 °C.
3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa)
In the case of commercial metering, (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming pressure down.
Valve opens at 2060 kPa, closes at 1470 kPa
Nominal operating pressure: 200-1000 kPa
Minimum operating water flow will depend on setpoint and inlet temp.
Please note: If the water inlet pressure drops below the minimum value, operation of the INFINITY is not guaranteed.
50 dB(A), some people are susceptible to low level noise. This needs to be considered if locating near a bedroom.
Energy Safety Supplier Declaration of Compliance: 1825620179
Our smallest most affordable model. This controller can be installed anywhere in the house.
Will run a bath for you, turn off the water, then tell you when it's ready.
Designed for kitchens and laundries, works in conjunction with the Bathroom Deluxe Controller.
Hide an external continuous flow water heater behind a door and out of sight.
The upwards flue diverter is an accessory that can be fitted to an external Rinnai INFINITY. It is designed to expel combustion products in an upwards direction.
An accessory that can be fitted to an external Rinnai INFINITY water heater. It is designed to expel combustion products in a sideways direction.
A sturdy security bracket can be installed to act as a permanent deterrent to thieves
This article clarifies some of your frequently asked questions amidst all the confusion about the future of gas.Read Article
Rinnai strives to make sustainable improvements across all areas of our business as we hope to shape and influence the future of the gas industry. We are proud to announce that we have developed the world’s first 100% hydrogen combustion technology for residential water heaters.Read Article
Hot water can make up a third of our electricity bill! This ends up being a lot of amount of money as time goes by. With a few small changes in our daily habits and routines, we can cut down on these costs.Read Article