Arriva 752

Overview

$6,899

RRP

Includes engine ($5918), stainless inner and black outer frame ($910), and white quartz ($71)—ordered separately. This is indicative pricing only.

Designed and made in New Zealand

Elegant and stylish with six frame options and modern quartz or pebble burn media, the Arriva 752 will look amazing in your living room.

High performance and resource considerate, efficiency ensures highest heat output for the lowest energy consumption.

The versatile Rinnai power flue removes installation restrictions and allows the Arriva to be installed in rooms where other gas fires cannot go.

Operated by a remote that has multiple features including thermostat control, set and forget timer, and child lock.

Read More

Design Your Fire

Frame
Burn Media

Product Details

Suitable for living rooms and open plan areas. Versatile power flue system makes for easy installation in almost any living space including bedrooms.

Heating areas
- Upper North Island, up to 112 m2
- Central and lower North Island, up to 77 m2
- South Island, up to 65 m2

Technical Specifications

INPUT

8-31.5

OUTPUT

1.8-7.0

EFFICIENCY

79-89%

Output and efficiency will vary according to gas type and flue configuration.
Gas type

Available for Natural Gas or LPG, specify at the time of purchase.

Burner

Ember bed and flame burner

Combustion system

Yellow flame and bunsen multi port burner

Data plate

Inside appliance, upper right hand side, behind convection fan

Efficiency

79-89%

Fan

3-speed (high, medium, and low) radial blower

Flue

Power flue, inner - 50 mm, outer 80 mm.
Rinnai warranty conditions will be voided if non Rinnai flue components are fitted. This heater is only certified for use with approved Rinnai flueing components.

Gas connection

½ " BSP (lower right hand side of appliance).

Gas control

Electronic control

Ignition

Continuous spark electronic ignition

Noise level

33-41 dB(A), fan low to high

Power consumption

High 90 W, low 60 W, standby 10 W.
Standard electrical connection is to the right hand side of the appliance.

Safety devices

Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detector.

Temperature control

Thermostatic, temperature control 16-26 °C

Weight

70 kg

General clearances

The minimum clearances listed below are measured from the edge of the glass.

  • Above - 400 mm
  • Sides - 400 mm (includes side walls)
  • In front - 1000 mm
Dimensions
  • These are the unit dimensions only, not the framing/cavity dimensions
  • Viewable glass dimensions 700 x 305 mm

Compliance

ES: Supplier Declaration of compliance
• Declaration number - 1348120126

Market release

June 2012

CAD/BIM Downloads

FAQs

Yes. The majority of modern gas fires have electronic ignition and safety components that require electricity. For customers concerned with power outages, there are commercially available battery backup systems. These are not sold by Rinnai. One provider that does sell battery back up systems is: Helio (www.heliosps.co.nz) who supply systems specifically designed for use with gas space heaters and water heaters.

For flues terminating through the roof there is a requirement for how far the flue terminal needs to be from the building. This clearance is required to ensure products of combustion are cleared adequately. Rinnai recommends the flue cowl should have a 500 mm clearance from any part of the building.

For more information, refer to the installation manual of the gas fireplace you are interested in – available on our website.

With the exception of the Compact 2 model, all Rinnai fires may be suitable to have a TV installed above them. Rinnai fires incorporate a fan that distributes warm air outwards into the room rather than directly upwards, meaning that installation of a TV may be an option.

Please refer to the Specification guide for gas fireplaces for recommended installation clearances. It is the responsibility of the owner to check the TV installation instructions with the TV supplier to verify clearances. Some TV manufacturers have warranty conditions that state a TV is not to be installed above a fireplace. Rinnai does not accept any responsibility for damage to a TV resulting from the use of this information.

This is a fireproofing box that isolates the appliance from combustible materials. For the Linear, Evolve, Symmetry and Arriva models, this is integrated into the design of the fire. For the Neo inbuilt, Ember and Compact gas fires, a zero clearance frame or box needs to be purchased in addition to the fire if the installation requires isolation from combustible materials.

For reliable operation, Rinnai gas fires should be serviced every two years (including inspection of the flue system). If they are in a particularly dusty environment or subject to excess lint (for example dog hair, or where there are newly laid carpets) then annual servicing is recommended.

If you’d like to schedule a service, just give us a call 0800 RINNAI (0800 746 624) or fill in our form online.