Made in NZ.
Convenient range of capacities, 250-500 L.
Fully fitted sight glass, convenient side filling and overflow. High quality thermostats with 2 x 3 kW elements. Cylinders are fully insulated with CFC-free polyurethane foam insulation.
Cylinders come with secure tap fitting to increase service life, and a fiver year warranty on the inner cylinder.
Indoor low pressure dairy installations. Not suitable as a pool or spa heater.
| Code | Capacity | Element |
| HJCD250 | 250 L | 2 x 3 kW |
| HJCD350 | 350 L | 2 x 3 kW |
| HJCD450 | 450 L | 2 x 3 kW |
| HJCD550 | 550 L | 2 x 3 kW |
Not required
Cold water inlet - 20 mm
Hot water outlet - 40 mm
Low watt density nickel plated copper 1.25 " BSP boss
Maximum inlet pressure 120 kPa
Maximum working pressure 120 kPa / 17 PSI
7 " thermostat 120 °C to ensure water reaches 99 °C (max. thermostat setting 99 °C)
N/A
August 2019
Installing a commercial water heating solution has it’s advantages when you use Rinnai, as this customer found out.
Read Article
If you’re thinking about an Air Conditioner this summer, you're probably asking yourself ‘How much will an air-con cost?’. Here, we'll talk about the cost of installing an Air Conditioner in New Zealand.
Read Article
Hot water heat pumps are innovative water-heating technologies that are helping to address environmental concerns and improve energy efficiency.
Read Article
