Discontinued Product, please contact 0800 RINNAI for more information

Discontinued Product, please contact 0800 RINNAI for more information

Reflection range (Advance, Amplify, Elevate)

All models of the Relection range were discontinued in Mar 2013

Reflection range

The Reflection range consisted of three models:

Reflection Advance ETR
Designed to slot into an existing masonry chimney. It came in two frame options; galaxy black and dark bronze.

Reflection Amplify ETR
Designed for mounting directly on the floor. It came in three frame options; galaxy black, dark bronze, and satin chrome.

Reflection Elevate ETR
Designed for elevated installations. It came in three frame options; galaxy black, dark bronze, and satin chrome.

All models are operated using an electronic timer remote control.

Suitable for
The Reflection models are suitable for living rooms and open plan areas. The three models are designed for different installations.

ADVANCE: Designed to be installed into an existing masonry installation.

AMPLIFY: Best suited to a floor mounted mock chimney fireplace installation.

ELEVATE: Recommended for an up-wall installation into a mock chimney—not suitable for retrofitting into an existing masonry fireplace.

Heating area
Can heat up to 84 m² (depending on where you live).

Gas type
Available for Natural Gas or LPG. Gas type specified at the time of purchase.

General clearances


11-30 MJ/h


2.3-6.2 kW



Burner Ceramic logs and ember bed
Combustion System Yellow flame bunsen multi port burner
Data Plate Bottom panel, front right hand side
Fan Type Tangential 2-speed (high and low), rating 90 W
Flue - Masonry Rinnai flexiliner flue system. Typical kit is 3.6 m, but can be added to with a flexiliner flue extension, which comes as 2 m in length, extending out to 3.6 m.
Flue - Mock chimney

Natural draft twin-skin flue. Termination, an approved 100 mm cowl must be fitted to all installations. Mock chimney installations require a Zero Clearance Box and Zero Clearance Flue Kit. Flue dimensions: outer = 150 mm, inner = 100 mm.

Gas Control Electronic control valve
Gas Connection ½ "BSPT male thread
Ignition System Electronic continuous spark discharge to intermittent pilot by either remote or push button method
Noise Level Estimated 53 dB(A) with fan on high
Power Consumption High 60 W, low 35 W. Power cord is located lower right hand side of heater
Safety Devices Overheat switches, flame failure sensing system, thermal fuse, overcurrent fuse, and spark detector
Weight 50 kg
Market Release 2008
Discontinued March 2013

Advance dimensions
Reflection advance dimensions diagram

Amplify dimensions
Reflection Amplify dimensions diagram

Elevate dimensions
Reflection Elevate dimensions diagram

Ducted Gas Heating Service Centre

Ducted Gas Heating Service Centre
Operating 5 days a week, 8am to 5pm, Monday to Friday our New Zealand based customer service centre provides nothing but top quality. If you need to book in a Ducted Gas Heating service, we have a team of providers fully trained and equipped with diagnostic tools to service your appliance when you need them. 

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message