Above RRP is for the single-sided model. Double-sided $11,999.
RRP includes the engine and burn media, it does not include flueing.
With its eye-catching design, this beautiful fire is sure to become the centrepiece of your home.
With FlameTech, flames emanate from the logs themselves just as they do in real life. Flames also burn more realistically thanks to class-leading flame height. The new technology even extends to the embers, allowing them to glow more brightly and naturally.
All fires in the Linear Collection are available in single and double-sided variants.
Suitable for indoor installations only.
Ideal for living rooms and open plan areas. The versatile power flue system makes for easy installation in almost any living space, including bedrooms.
Heating areas
- Upper North Island, up to 123 m²
- Central and lower North Island, up to 85 m²
- South Island, up to 71 m²
IMPORTANT: Gasfitters and builders
Linear models have adjustable wallboard support rails. The gasfitter will adjust these based on the thickness of the wall lining. It's important the gasfitter gets the wall lining information from the builder. If this is not done the wall lining will not sit flush (if a flush installation) and the cavity can overheat causing the fire to cut out.
BUILDERS: Due to the heat from the fire ensure a 50 mm clearance around the unit, including the rear (if a single-sided model). This information is included in the framing dimension pages of the installation guide. Use this in conjunction with the 'Linear additional wall lining detail' to ensure a successful installation.
Installer resource - FlameTech log set placement video
https://www.youtube.com/watch?v=hGaMsnQSnlw
15-35
MJ/h
3.5-7.7
kW*
75%
Available for Natural Gas or LPG, specify at the time of purchase.
2-speed fan. Heat is distributed from the top of the appliance.
Base of the combustion chamber, LHS, on the convection fan access panel
½ " BSP, the gas supply terminates inside the heater—lower left hand side
Continuous spark electronic ignition.
37-45 dB(A)
Power flue. Inner 50 mm, outer 70-80 mm. Appliance MUST be installed with a Rinnai flue system.
The Linear has a 1.5 m cord with a three pin plug supplied. The power cord passes through a slot in the right hand side of the appliance.
Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detectors
The Linear can be operated using the basic infra-red remote, or for more features, such as timers and thermostatic control, using Rinnai's Wi-Fi fireplace controller app available from the Apple App store or Google Play.
100 kg
The minimum clearances listed below are measured from the edge of the glass.
Energy Safety Supplier Declaration of Compliance: Declaration number - 1907520195
July 2019
Yes. The majority of modern gas fires have electronic ignition and safety components that require electricity. For customers concerned with power outages, there are commercially available battery backup systems. These are not sold by Rinnai. One provider that does sell battery back up systems is: Helio (www.heliosps.co.nz) who supply systems specifically designed for use with gas space heaters and water heaters.
For flues terminating through the roof there is a requirement for how far the flue terminal needs to be from the building. This clearance is required to ensure products of combustion are cleared adequately. Rinnai recommends the flue cowl should have a 500 mm clearance from any part of the building.
For more information, refer to the installation manual of the gas fireplace you are interested in – available on our website.
With the exception of the Compact 2 model, all Rinnai fires may be suitable to have a TV installed above them. Rinnai fires incorporate a fan that distributes warm air outwards into the room rather than directly upwards, meaning that installation of a TV may be an option.
Please refer to the Specification guide for gas fireplaces for recommended installation clearances. It is the responsibility of the owner to check the TV installation instructions with the TV supplier to verify clearances. Some TV manufacturers have warranty conditions that state a TV is not to be installed above a fireplace. Rinnai does not accept any responsibility for damage to a TV resulting from the use of this information.
For reliable operation, Rinnai gas fires should be serviced every two years (including inspection of the flue system). If they are in a particularly dusty environment or subject to excess lint (for example dog hair, or where there are newly laid carpets) then annual servicing is recommended.
If you’d like to schedule a service, just give us a call 0800 RINNAI (0800 746 624) or fill in our form online.
This is a fireproofing box that isolates the appliance from combustible materials. For the Linear, Evolve, Symmetry and Arriva models, this is integrated into the design of the fire. For the Neo inbuilt, Ember and Compact gas fires, a zero clearance frame or box needs to be purchased in addition to the fire if the installation requires isolation from combustible materials.
Investing in an electric fireplace can significantly enhance your home's ambiance while providing efficient heating solutions. This guide aims to help you navigate through the options and make an informed decision.
Read Article
If you're looking to enhance your home's aesthetic or add ambiance to your living space, electric fireplaces offer a stylish and convenient solution.
Read Article
The modern electric fireplace retains the design charm of traditional fireplaces, and adds sustainability, customisation and intelligent features.
Read Article
