RRP is for the RDV2320C (mock chimney variant). The RDV2320M (masonry variant) is $4680. Flueing is not included, this must be ordered separately.
The Novo is a stylish and versatile gas fire that is perfect for open plan areas, living rooms, and large bedrooms. There are two styles to choose from, the contemporary black frame, or the classic villa-style frame option.
Back-to-basics simple infra-red remote makes operation easy and stress-free, or upgrade to Wi-Fi capability with our Wi-Fi module kit.
Suitable for masonry installations and installations into a mock chimney in open plan areas and living rooms. As a room sealed (direct vent) appliance it can also be installed in larger bedrooms if this meets the 22.214.171.124 requirements of AS/NZS 5601.1.
Heating areas (up to)
- Upper North Island: 112 m2
- Central and lower North Island: 77 m2
- South Island: 65 m2
Installer resource - Novo log set installation video
Available for Natural Gas or ULPG, specify at the time of purchase.
Lower right hand side of the base panel (in front of the gas control)
120 V AC 50 Hz 2-speed centrifugal blower.
Brass ½ " BSPT male fitting. The gas supply terminates inside the unit—lower RHS of the appliance.
230-240 V AC 50 Hz high voltage electronic spark.
Room size, smaller rooms will heat up quickly, and due to the heat of the appliance, the fire will turn to a low setting once the set temperature has been reached.
Colinear direct vent flexi flue, air intake Ø75 mm, exhaust Ø100 mm
Coaxial direct vent flue, inner Ø100 mm, outer Ø170 mm
A 1.5 m power cord with a three pin plug is supplied. The power cord passes through a slot in the back left hand corner of the appliance.
Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detection.
Operated using a basic infra-red remote, or for more features such as timers and thermostatic control, by using a Wi-Fi module (purchased separately) and using the Rinnai Wi-Fi fireplace controller app.
Approx. 64 kg
Energy Safety Supplier Declaration of Compliance: Declaration number - DEC-000002078DOL7
This accessory, ideally ordered at the time of purchasing the fire, is designed to protect against touching the hot surface of the glass.
Black powder coated panel for masonry installations where the cavity is slightly larger than the frame.
Enables selected Rinnai gas fireplaces to be connected to the Rinnai wi-fi app for full thermostatic control and functionality.
Rinnai is excited to announce the acquisition Warmington™ and Fires by Design™ brands.Read Article
Rinnai's head designer Kai Röever explains how the design process for the Linear collection worked in a content piece for NZ's top build and design platform ArchiPro.Read Article