High efficiency forced flue convection heater supported by electronic timers
Data plate
Lower bottom panel, left hand side
Electrical supply
230 V 50 Hz with supply cord and 3-pin plug
Fan
Centrifugal drum type fan
Gas connection
15 mm BSP male thread
Gas control
Rinnai electronic modulating gas control valve
Humidifier tray capacity
0.7 L
Ignition
Direct continuous spark electronic ignition—no pilot
Noise level
31-38 dB(A)
Power consumption
Approx. 41 W (on high), < 1 W on standby
Safety devices
Overheat switch, fusible link, flame failure device, electrical fuse, and power failure
Temperature range
16-26 °C by 1 °C increments
Celsius or Fahrenheit
To change the temperature scale:
1. The heater must be off.
2. Press the Timer 1 and Timer 2 buttons at the same time for about 5 secs. The display will show °C or °F.
3. Use the arrow keys to select the temperature scale.
4. Press the ON/OFF button.
Weight
21 kg
Compliance
ES: Supplier Declaration of Compliance
• Declaration Number – 1408020132