RRP includes the engine and the base. Flueing not included, this must be ordered separately.
Simple modern lines, a glowing logset and realistic flame picture. The Novo Freestander will bring ambience and warmth to those cold winter nights. Choose from two base options, the cabinet (pictured to the right), or the plinth (pictured below).
Back-to-basics simple infra-red remote makes operation easy and stress-free, or upgrade to Wi-Fi capability with our Wi-Fi module kit.
Suitable for freestanding installations in open plan areas and living rooms. As a room sealed appliance it can also be installed in larger bedrooms if this meets the 126.96.36.199 requirements of AS/NZS 5601.1.
Heating areas (up to)
- Upper North Island: 112 m2
- Central and lower North Island: 77 m2
- South Island: 65 m2
Available for Natural Gas or ULPG, specify at the time of purchase
Lower right hand side of the base panel (in front on the gas control)
120 V AC 50 Hz 2-speed centrifugal blower
Brass ½ " BSPT male fitting. The gas supply terminates inside the unit—lower RHS of the appliance.
230-240 V AC 50 Hz high voltage electronic spark
Room size, smaller rooms will heat up quickly, and due to the heat of the appliance, the fire will turn to a low setting once the set temperature has been reached.
Direct vent coaxial flue. Draws air for combustion from the outside and expels combusted gases to the outside. Appliance must be installed with a Rinnai flue system.
A 1.5 m power cord with a three pin plug is supplied. The power cord passes through a slot in the back left hand corner of the appliance.
Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detection.
Operated using a basic infra-red remote, or for more features such as timers and thermostatic control, by using a Wi-Fi module (purchased separately) and using the Rinnai Wi-Fi fireplace controller app.
Novo Cube = approx. 75 kg
Novo Freestander cabinet base = 20 kg
Novo Freestander plinth base = TBD
Energy Safety Supplier Declaration of Compliance: Declaration number - DEC-000002078D0L7
The Novo Freestander has two base options available; cabinet base, and the plinth base.
Enables selected Rinnai gas fireplaces to be connected to the Rinnai wi-fi app for full thermostatic control and functionality.
This accessory, ideally ordered at the time of purchasing the fire, is designed to protect against touching the hot surface of the glass.
The article clarifies some of your frequently asked questions amidst all the confusion about the future of gas.Read Article
Rinnai's head designer Kai Röever explains how the design process for the Linear collection worked in a content piece for NZ's top build and design platform ArchiPro.Read Article
If you’ve ever worked in an office environment, or you battle with a spouse over who gets control of the Heat Pump controller, you will be no stranger to how uncomfortable your home can be when the temperature isn’t quite right.Read Article