High efficiency power flued heater with programmable timers. Unit discharges warm air through louvres located at the base of unit. This means the room heats quickly as warm air is directed out into the room and not straight up.
Suitable for
Residential heating appliance suitable for open plan areas such as living rooms, and bedrooms. Can heat up to 75 m2 (depending on geographical location).
White*
9-23
MJ/h
1.9-5.2
kW
81
%
Available in NG and LPG, gas type specified at time of purchase
Stainless steel bunsen burner
Logic controlled 8-speed modulating fan. Air discharge through bottom louvres.
15 mm BSP male thread
Capacity 1.2 L, rate of evaporation 150 ml/hr
Automatic ignition (continuous spark)
32-40 dB(A)
Touch sensitive electronic control pad, remote control, set and forget dual timer.
54-60 W (low to high)
16-26 °C by 1 ºC increments
Flame failure (flame rod), overheat (bi-metal switch, thermal fuse, thermistor), power failure (PCB), power fuse (3 A fuse), and fan delay (microcomputer timer)
22 kg
1997
April 2013, superseded by 559FT model
How do you choose between convective or radiant heating? A good start is to read this article.
Read ArticleA cold home is an unhealthy home. And there are more unhealthy homes in New Zealand than you probably realise.
Read ArticleIf your home is damp or mouldy, here’s some advice on how to dry it out.
Read ArticleOur stylish and efficient heating and cooling solutions are designed to bring you total home comfort.
FIND OUT MORESimply enter the product code and serial number to register a Rinnai product.
REGISTER A PRODUCT