For sheer versatility and great good looks, it is hard to beat.
The Rinnai Timberflame Compact is our most compact fire. Deliberately designed to get into those tighter spaces, whether it's an existing masonry fireplace or an in-wall installation in a smaller living space.
Suitable for
Residential heating appliance suitable for living rooms and open plan areas
Heating area
Can heat up to 78 m2 (depending on where you live in NZ).
9-25
MJ/h
1.6-5.0
kW
73%
Available in NG or LPG, gas type specified at the time of purchase
Ceramic logs and ember bed
Yellow flame bunsen multi port burner
Inside the appliance on the front right hand side panel
Tangential 2-speed, rating 28 W
Terminal 43 x 245 mm rear discharge (spigot)
Natural draft flue. Mock chimney installations require a zero clearance box and zero clearance flue. Flue dimensions; inner - Ø100 mm, outer Ø150 mm.
Push button combination control valve
½ " BSP male flare to barrel union
Electronic continuous spark discharge to intermittent pilot by push button method
45 dB(A)
High - 80 W, standby 4 W. Power cord is located lower right hand side of the fire
39 kg
The minimum clearances listed below are measured from the edge of the glass.
Energy Safety Supplier Declaration of Compliance: Declaration number - Rin3152a
March 2014, superseded by the Compact 2
Rinnai is excited to announce the acquisition Warmington™ and Fires by Design™ brands.
Read ArticleThis article clarifies some of your frequently asked questions amidst all the confusion about the future of gas.
Read ArticleRinnai's head designer Kai Röever explains how the design process for the Linear collection worked in a content piece for NZ's top build and design platform ArchiPro.
Read Article