Discontinued Product, please contact 0800 RINNAI for more information

Discontinued Product, please contact 0800 RINNAI for more information

Rinnai Infinity HD200i Internal (REU-VM2632FFUC)

Rinnai Infinity HD200i Internal (REU-VM2632FFUC)

Internal continuous flow gas hot water heater with status monitor, preset to 75 °C. Balanced flued, room sealed fan assisted appliance.

Hot water capacity
2.4 to 32 litres per minute.

Suitable for
• commercial and domestic internal applications
• applications requiring higher hot water temperatures, can be set up to 85 °C
• mains and low pressure systems

Hard or acidic water will need to be treated to use this product.

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

Colour: Titan metallic
Input: 195 MJ/h or 54 kW
Output: 47 kW
Efficiency: 87%
REU Number: VM2632FFUC


Capacity Hot water capacity: 2.4 to 32 litres per minute
Nominal water capacity: 26 litres per minute at a 25 °C rise (1560 L/h)
Connections Hot water oulet: R¾ (20 mm)
Cold water inlet: R¾ (20 mm)
Gas supply: R¾ (20 mm)
Exhaust System Forced flue
Ignition System Direct electronic ignition
Injector Size (mm) NG: 1.00, 1.70,   LPG: 0.75, 1.15
Line Pressure (max.)

3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa).

In the case of commercial metering (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming line pressure down.

Noise Level 49 dB(A)
Nox af 55 ppm
Power Consumption Normal: 65 W
Standby: 2 W
Automatic Frost Protection: 100 W
Pressure Relief Valve opens at 2060 kPa, valve closes at 1470 kPa
Safety Devices Flame failure, boil-dry protection, overheat protection (OHS), fusible link, pressure relief valve, combustion fan rpm check
Temperature Settings 40, 42, 50, 55, 65, 75, 85 °C
Water Flow Control Water flow sensor, electronic water flow control device, and electronic by-pass flow control device
Water Supply Nominal operating pressure: 150-1000 kPa
Minimum water flow: 2.4 litres per minute
Weight 22 kg
Market Release 2006
Discontinued 2011 (superseded by HDi200 internal)

  All dimensions are in mm  
A Width 350
B Depth 234.5~274.5
C Height of unit 600
D Height including brackets 641
E Hot water outlet from wall 91~131
F Hot water outlet from centre 110
G Cold water inlet from wall 70~110
H Cold water inlet from centre
(measurement is to the left of the centre line)
I Gas connection from wall  99~139
J Gas connection from centre  89
K Condensate outlet from wall  -
L Condensate outlet from centre  -
M Gas: Length of gas connection (from base)
Cold: Length of cold water inlet (from base)
Hot: Length of hot water outlet (from base)

Rinnai Infinity HD200i Internal (REU-VM2632FFUC)

Ducted Gas Heating Service Centre

Ducted Gas Heating Service Centre
Operating 5 days a week, 8am to 5pm, Monday to Friday our New Zealand based customer service centre provides nothing but top quality. If you need to book in a Ducted Gas Heating service, we have a team of providers fully trained and equipped with diagnostic tools to service your appliance when you need them. 

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message