High efficiency power flued heater. Unit discharges warm air through louvres located at the base of unit. This means the room heats quickly as warm air is directed out into the room and not straight up. The FM model has a control panel that is lockable, and can be connected to an external timer.
Suitable for
Commercial heating appliance ideal for offices, classrooms, and other medium sized commercial areas. Can heat up to 63 m2 (depending on geographical location).
Available in NG and LPG, gas type specified at time of purchase
Combustion system
Stainless steel bunsen burner
Fan type
Logic controlled 8-speed modulating fan. Air discharge through bottom louvres.
Gas connection
15 mm BSP male thread
Humidifier tray
Capacity 1.3 L
Ignition system
Automatic ignition (continuous spark)
Injector size
NG – 4 x 1.30 mm
LPG – 4 x 0.85 mm
Noise level
33-41 dB(A)
Operation
Touch sensitive electronic control pad, and remote on/off controller with temperature adjustment
Power consumption
54-60 W (low to high)
Temperature range
16-26 °C by 1 ºC increments (low 10 °C)
Safety devices
Flame failure (flame rod), overheat (bi-metal switch, thermal fuse, thermistor), power failure (PCB), power fuse (3 A fuse), and fan delay (microcomputer timer)