Vitreous enamel solar enabled storage tanks, preset to 65 °C. Perfect option for replacing existing internal standard electric tanks, and can be installed inside or outside your home.
Range
• 135 L with a 2 kW element as standard
• 180 L, 3 kW or 3.6 kW element available
• 215 L with a 3.6 kW
• 270 L with a 3.6 kW
• 340 L with a 3.6 kW element
Hot and cold water connections ¾ " (20 mm)
cTech element positioned at the bottom of the tank
Storage volume heat up time @45 °C rise
IPX4
700 kPa (approx.) -135, 180, 215 L
500 kPa (approx.) - 270, 340 L
850 kPa (approx.) - 135, 180, 215 L
700 kPa (approx.) - 270, 340 L
60-75 °C
Supplied - 10 kW / 1000 kPa
| Cylinder | Empty | Full (approx.) |
| 135 L | 62 kg | 201 kg |
| 180 L | 71 kg | 251 kg |
| 215 L | 98 kg | 313 kg |
| 270 L | 87 kg | 364 kg |
| 340 L | 101 kg | 441 kg |
Based on a thermostat temp. setting of 60 °C and an incoming water temp. of 15 °C
November 2017, superseded by the new indoor outdoor mains pressure enamel range
This article clarifies some of your frequently asked questions amidst all the confusion about the future of gas.
Read Article
Hot water can make up a third of our electricity bill! This ends up being a lot of amount of money as time goes by. With a few small changes in our daily habits and routines, we can cut down on these costs.
Read Article
New Zealand's abundant supply of low-cost firewood makes it a great option to heat a home's water via a wetback accessory and a specialised hot water cylinder.
Read Article
