Symmetry RDV3611

Overview

$7,099

RRP

Price above includes the engine ($6169) and a stainless on black premium frame $929 (ordered separately)

Designed and made in New Zealand

Blending functionality and style, the Symmetry RDV3611 from Rinnai will be the focal point of your living environment. The fire features cost-saving efficiency, design versatility and leading innovations to help keep your home warm and healthy throughout the year.

The Rinnai Symmetry RDV3611 is a direct vent inbuilt gas fireplace with a glass front and convection fan, operated with a remote control (7-day programmable timer).

Read More

Design Your Fire

Frame
Burn Media

Product Details

Suitable for living rooms and open plan areas. Recommended for installations into a false (mock) chimney. Not suitable for retrofitting into an existing masonry fireplace.

Heating areas
- Upper North Island, up to 120 m2
- Central and lower North Island, up to 83 m2
- South Island, up to 71 m2

Technical Specifications

INPUT

19-33

OUTPUT

3.8-7.5

EFFICIENCY

80%

Will vary according to type of flue, for example 4.2-7.0 kW (short flue), 3.8-7.5 kW (long flue), and 4.0 stars (horiz. flue), 4.2 stars (vert. flue).
Gas type

Available for Natural Gas or LPG, specify at the time of purchase.

Combustion method

Ceramic top pan burner

Data plate

Centre front of base panel (behind the service panels)

Flue

Twin skin flue: inner = 100 mm, outer = 170 mm. Appliance must be installed with a Rinnai supplied flue system. Maximum flue height is 5.4 m.

N.B: For windy areas such as Wellington, coastal properties, and elevated properties on hills we recommend an additional flue component call the DV high wind vertical cowl protection kit (R3655). It is designed to wrap around the flue cowl to reduce wind entering the flue and causing flame disturbances. Refer to the installation instructions in the 'Downloads' tab for more information.

Gas connection

½ " BSP male flare

Ignition

Integrated sparker to pilot

Noise level

37-45 dB(A)

Power consumption

High 50 W, standby

Safety devices

Light to pilot, delayed ignition, overheat switch, electronic flame supervision (flame failure), and combustion chamber pressure relief.

Temperature control

Thermostatic, temperature control range 7-32 °C

Weight

60 kg

General clearances

The minimum clearances listed below are measured from the edge of the glass.

  • Above - 400 mm
  • Sides - 400 mm (includes side walls)
  • In front - 1000 mm
Dimensions
  • These are the unit dimensions only, not the framing/cavity dimensions
  • Viewable glass dimensions 880 x 390 mm

Market release

April 2012

Compliance

Energy Safety Supplier Declaration of Compliance: Declaration number - 1326720122

CAD/BIM Downloads

FAQs

Yes. The majority of modern gas fires have electronic ignition and safety components that require electricity. For customers concerned with power outages, there are commercially available battery backup systems. These are not sold by Rinnai. One provider that does sell battery back up systems is: Helio (www.heliosps.co.nz) who supply systems specifically designed for use with gas space heaters and water heaters.

For flues terminating through the roof there is a requirement for how far the flue terminal needs to be from the building. This clearance is required to ensure products of combustion are cleared adequately. Rinnai recommends the flue cowl should have a 500 mm clearance from any part of the building.

For more information, refer to the installation manual of the gas fireplace you are interested in – available on our website.

With the exception of the Compact 2 model, all Rinnai fires may be suitable to have a TV installed above them. Rinnai fires incorporate a fan that distributes warm air outwards into the room rather than directly upwards, meaning that installation of a TV may be an option.

Please refer to the Specification guide for gas fireplaces for recommended installation clearances. It is the responsibility of the owner to check the TV installation instructions with the TV supplier to verify clearances. Some TV manufacturers have warranty conditions that state a TV is not to be installed above a fireplace. Rinnai does not accept any responsibility for damage to a TV resulting from the use of this information.

This is a fireproofing box that isolates the appliance from combustible materials. For the Linear, Evolve, Symmetry and Arriva models, this is integrated into the design of the fire. For the Neo inbuilt, Ember and Compact gas fires, a zero clearance frame or box needs to be purchased in addition to the fire if the installation requires isolation from combustible materials.

For reliable operation, Rinnai gas fires should be serviced every two years (including inspection of the flue system). If they are in a particularly dusty environment or subject to excess lint (for example dog hair, or where there are newly laid carpets) then annual servicing is recommended.

If you’d like to schedule a service, just give us a call 0800 RINNAI (0800 746 624) or fill in our form online.