Discontinued Product, please contact 0800 RINNAI for more information

Discontinued Product, please contact 0800 RINNAI for more information

Rinnai Symmetry RDV3600


Rinnai Symmetry RDV3600

Discontinued March 2014

Rinnai has developed a second Symmetry model - the RDV3600. This lower specification model has the same great styling as the Symmetry RDV3610 but lower efficiency at a lower cost.

The Rinnai Symmetry RDV3600 is a direct vent inbuilt gas fireplace (natural draft) with a glass front, operated with a remote control. As of the 1st of April 2012 the Symmetry RDV3600 will be sold with a fan pre-installed. 

Suitable for
Living rooms and open plan areas, can heat up to 82 m² (depending on where you live). Ideally suited to areas as a secondary heating source.

Recommended for
A build installation into a false (mock) chimney. Not suitable for retrofitting into an existing masonry fireplace.

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

General clearances for the Symmetry RDV3600
The 400 mm side clearance includes side walls.

Input: 19-33 MJ/h
Output: 2.9-5.7 kW
Heating Area: 82m²


Combustion Method Ceramic top pan burner
Data Plate Centre front of base panel (behind service panels)
Flue Balanced flue: inner = 100 mm, outer = 170 mm
Appliance must be installed with a Rinnai supplied flue system
Gas Connection ½ "BSP male flare
Ignition Integrated sparker to pilot
Noise Level 37-45 dB(A)
Power Consumption High 15 W (without fan), high 48 W (with fan fitted), standbyStandard electrical connection is to the right side of the appliance
Safety Devices Light to pilot, delayed ignition, electronic flame supervision (flame failure), and combustion chamber pressure relief
Temperature Control Manual control on remote (Hi-Lo)
Thermal Efficiency N/A—decorative appliance, not certified as a space heater
Weight 60 kg
Market Release 2010
Discontinued March 2014

Ducted Gas Heating Service Centre

Ducted Gas Heating Service Centre
Operating 5 days a week, 8am to 5pm, Monday to Friday our New Zealand based customer service centre provides nothing but top quality. If you need to book in a Ducted Gas Heating service, we have a team of providers fully trained and equipped with diagnostic tools to service your appliance when you need them. 

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message

Brochures