The Rinnai wireless controller (with transceiver) is the easiest and quickest to install. Great for retrofitting into existing homes.
Digital controllers allow you to select the exact temperature of the hot water at the tap within the controller temperature range.
Benefits of a controller:
Extended warranty
Rinnai INFINITY installations, when a controller is installed receive an extra two years on the INFINITY warranty.
Silver
37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 48, 50, 55 °C (60, 65 °C HD models)
Transceiver - MC503M
Controller - MC503S
Current range of INFINITY water heaters and controllers:
- HD-Series
- Deluxe bathroom (MC-100V) and Deluxe kitchen (MC-BC-100V) controllers
Discontinued range of INFINITY water heaters and controllers:
- EF250, EFi250, VT-Range, XR-Range
- Compact controller MC91Q universal
Not compatible with the previous wireless controller (MC502)
January 2016
Installations with a Rinnai INFINITY continuous flow gas hot water heater installed, refer compatible water heater models in the 'Tech Specs' section. Each remote controller can be individually programmed, however the water heater can only deliver one set temperature at any time.
Rinnai water controllers cannot be used with Rinnai INFINITY units connected to solar systems, when a Rinnai iHeat is installed, or in a ring main system using N-Series models.
Positioning
Controllers are water resistant, however, durability is improved when positioned outside the shower recess. All deluxe water controllers must be installed at least 400 mm above the highest part of a sink, basin, or bath.
Controller configurations
A maximum of four water controllers (three for the N-Series) can be fitted. Any combination of the deluxe, compact, and wireless controllers can be used within the following parameters:
• Only ONE master can be installed. This can be a Kitchen Deluxe, Compact, or Wireless Controller.
• Up to two Bathroom Deluxe Controllers can be installed.
• Fourth controller in any installation must be a Compact or Wireless Controller.
