Discontinued Product, please contact 0800 RINNAI for more information

Discontinued Product, please contact 0800 RINNAI for more information

Rinnai Infinity XR26a Aggressive Water External (REU-V2630WGT)

Rinnai Infinity XR26a Aggressive Water External (REU-V2630WGT)


Specially designed for aggressive water areas (such as Christchurch)
Temperature controlled continuous flow gas hot water system for external domestic applications. Factory preset to 55 °C.

Hot water capacity
2.4 to 30 litres per minute.

Continuous flow hot water
This type of hot water system produces endless hot water. Continuous flow is an energy efficient water heating system—it's only on when you need hot water.

Energy efficiency

Suitable for

Aggressive water areas (such as Christchurch)
• External domestic installations
• High simulatenous hot water demand applications (homes with 1-2 bathrooms)
• Mains and low pressure systems

Gas type
LPG only

The following diagram has been provided to assist you in determining where (and if) an external continuous flow water heater can be positioned. If in doubt, prior to purchase, consult a licensed gasfitter.

Colour: White
Input: 199 MJ/h or 55 kW
Output: 44.6 kW
Efficiency: 81%
Energy Star Rating 5.5 stars

Capacity Hot water capacity: 2.4 to 30 litres per minute
Nominal water capacity: 26 litres per minute at a 25 °C rise (1560 L/h)
Connections Hot water oulet: R¾ (20 mm)
Cold water inlet: R¾ (20 mm)
Gas supply: R¾ (20 mm)
Exhaust System Forced flue
Ignition System Direct electronic ignition
Injector Size NG: 1.00, 1.55,   LPG: 0.70, 1.05
Line Pressure (min.) NG: 1.13 kPa,    LPG: 2.75 kPa
Line Pressure (max.)

3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa).

In the case of commercial metering (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming line pressure down.

Power Consumption Normal: 52 W (NG) and 57 W (LPG), Standby: 2 W, Automatic Frost Protection: 74 W
Pressure Relief Valve opens at 2060 kPa, valve closes at 1470 kPa
Noise Level 49 dB(A)
NOx af 52 ppm
Safety Devices Flame failure, boil-dry protection, overheat protection (OHS), fusible link, pressure relief valve, combustion fan rpm check
Water Supply Nominal operating pressure: 130-1000 kPa
Minimum water flow: 2.4 litres per minute
Weight 17 kg
Market Release 2007
Discontinued 2011
A Width 350
B Depth 194
C Height of unit 530
D Height including brackets 571
E Hot water outlet from wall 87
F Hot water outlet from centre 105
G Cold water inlet from wall 68
H Cold water inlet from centre 10
I Gas connection from wall 77
J Gas connection from centre 83
K Condensate outlet from wall
L Condensate outlet from centre
M Gas: Length of gas connection (from base)
Cold: Length of cold water inlet (from base)
Hot: Length of hot water outlet (from base)

Rinnai Infinity XR26a Aggressive Water External (REU-V2630WGT)

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Request a Service

*Request* a Service
At Rinnai NZ,  adding a touch of magic to life’s daily pleasures is what we are all about so that people can get on with the more complicated challenges in life.  Rinnai makes daily routines, like taking a hot shower or heating your home, simple, enjoyable and stress-free.  

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message