Rinnai Boil & Brew™

Instant boiling water

Rinnai Boil & Brew™

The British take tea, Americans have a coffee break, but for we Kiwis, it will always be smoko.

When the time comes, we put aside our work, grab our favourite mug and gather at the Boil & Brew with our tea bags and instant at the ready. For the next 15 minutes we dunk our biscuits and talk about our weekends, the rugby and what’s on the telly.

Made right here in New Zealand, with a new modern look and a number of improvements we know there are going to be many more smokos and great yarns around our new Rinnai Boil & Brew

Range of sizes
The Boil and Brew is available in 5L, 10L, 15L and 25L with a delivery from 35–200 cups an hour. They are ideal for any space that necessitates an endless supply of boiling water such as commercial kitchens, staff rooms and hospitals.

Automatic operation
The Rinnai Boil & Brew units are completely automatic, re-filling and heating as water is drawn off.

No more waiting for the kettle to boil—boiling water when you need it for tea, coffee, other hot drinks or convenience foods.

Easy clean
Attractive powder coat white case allows for easy cleaning of the unit.

Peace of mind
The Boil & Brew is backed by Rinnai after sales support.

Made in NZ

Suitable as a hot water dispenser for commercial applications such as; cafes, canteens, retirement homes, restaurants, hotels, hospitals, schools, sports complexes, factories, fast food outlets, shops, and offices.

Location and clearances
Locate the unit above a sink draining board, close to a cold water supply and a power outlet. For the 5 L, 10 L, and 15 L models, the location of the socket outlet/plug should be such as to give the user safe access for turning the unit on and off. The site should be dry and waterproof, and in a position that meets the minimum clearances shown below. These are required to allow safe access for servicing.

The heater should be positioned at a height to suit the items being filled.

Rinnai Boil & Brew clearances diagram


White powder coat

Inlet and overflow connections, R15 (½ " BSP). Stop tap and union not supplied.

For concealed plumbing connections installer to install two R15 (½ " BSP) female wing back, tee or elbows to the lower right hand corner of the dispenser mounting position.

Data plate

Cover off—middle of back panel. This label will have the serial number.

Hot water delivery* (approx. 6 cups per litre)

- 5 L   = 35 cups

- 10 L = 100 cups

- 15 L = 130 cups

- 25 L = 200 cups

* standard teacup is approx. 170 mls at greater than 65 °C
Element size and Amp rating

- 5 L   = 2.0 kW (10 A)

- 10 L = 2.4 kW (10 A)

- 15 L  = 2.4 kW (10 A)

- 25 L = 3.0 kW (15 A)

Electrical supply 5 L, 10 L, 15 L comes with a 2 m cord. 25 L is a fixed wired unit. Voltage rating 230/240 V 50 Hz AC, single phase.
Water supply pressure Minimum 87 kPa, maximum 1000 kPa.
Thermostats Electronic to control water temperature to boiling point.
Construction Outer casing white powder coated steel, thermal insulation 40 mm fibreglass, and copper water container.
Safety devices Automatic thermostat, temperature override, water level control, and water overflow protection.
Protection against water IPXO
Approx. nominal commissioning times from cold (mins. to ready)

- 5 L   = 14 minutes

- 10 L = 23 minutes

- 15 L  = 30 minutes

- 25 L = 50 minutes

Weights: empty and full

- 5 L   = 7 kg / 12 kg

- 10 L = 9 kg / 19 kg

- 15 L  = 10 kg / 25 kg

- 25 L = 12 kg / 37 kg

Temperature at altitude At 2000 m above sea level the boiling point of fresh water is 93 °C.
Market release April 2016

Boil & Brew dimensions diagram and dimensions table

Ducted Gas Heating Service Centre

Ducted Gas Heating Service Centre
Operating 5 days a week, 8am to 5pm, Monday to Friday our New Zealand based customer service centre provides nothing but top quality. If you need to book in a Ducted Gas Heating service, we have a team of providers fully trained and equipped with diagnostic tools to service your appliance when you need them. 

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message

Where to Buy

Find a Rinnai reseller near you: