Indoor Super Ray Radiant Heaters

Spread warmth over large spaces

Indoor Super Ray Radiant Heaters

The Rinnai Super Ray Indoor radiant heaters provide effective heating over a wide area. Smartly crafted so that the heat is directly channeled exactly where you want it.

A multiple burner generates infra-red rays which transmit the heat energy and dissipate the heat upon striking a surface.

Models to choose from, manual (pull cord) or electronic ignition:
• Indoor Super Ray 16 MJ
• Indoor Super Ray 24 MJ
• Indoor Super Ray 40 MJ

WMA = manual igntion models
WEA = electric ignition models

• 16 MJ = $647 (WMA), $1121 (WEA)
• 24 MJ = $896 (WMA), $1221 (WEA)
• 40 MJ = $1053 (WMA), $1468 (WEA)

Made in NZ

Suitable for
The Rinnai Indoor Super Ray heaters are for indoor commercial and industrial use only. Ideal in semi-industrial spaces such as cafes, schools, churches, and factories.

This appliance must be used in a well ventilated area. The gasfitter installing the appliance is responsible for this.

Approximate heating area
- 16 MJ = 19 m²
- 24 MJ = 28 m²
- 40 MJ = 47 m²

Heaters can be positioned side by side or facing each other, refer to the installation manual for further information.

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

It is critical to the safe operation of this appliance that the clearances are maintained so as the heater does not become a fire hazard.

* Super Ray heaters discharge products of combustion from the top of the unit which could cause damage or discolouration to the ceiling if the ceiling clearances are not maintained.


16 MJ/h, 24 MJ/h, 40 MJ/h


4.4 kW, 6.6 kW, 11.1 kW



Data plate Right hand side by gas inlet
Gas connection A manual isolating valve must be fitted and the unit must be connected to a correctly sized gas supply.
- NG, 1/2 " (12.7 mm) copper flare union
- LPG, 3/8 " (9.52 mm) copper flare union
Gas control: Manual model
Piezo ignition with flame failure
Gas control: Electronic model
Technical components model PFS 15R electronic ignition and white Rodgers model, 25M double solenoid regulator
Test point pressure On the regulator or manifold, see data plate for pressure
Compliance ES: Supplier Declaration of Compliance
• Declaration Number - 942320093


Indoor Super Ray Heat Shield

Indoor Super Ray Heat Shield
The heat shield acts as a deflector and insulator when fitted to an Indoor Super Ray heater.

Ducted Gas Heating Service Centre

Ducted Gas Heating Service Centre
Operating 5 days a week, 8am to 5pm, Monday to Friday our New Zealand based customer service centre provides nothing but top quality. If you need to book in a Ducted Gas Heating service, we have a team of providers fully trained and equipped with diagnostic tools to service your appliance when you need them. 

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message

Where to Buy

Find a Rinnai reseller near you: