Compact and unobtrusive, wall mounted unflued convector space heaters. The 501TF model is fan assisted.
Residential heating appliance, ideal for background heating in spaces such as hallways and entranceways. Can heat up to 13 m2, depending on where you live in NZ.
The 501 Cosypanels MUST NOT be installed in rooms smaller than 29 m3 (can be halved in a hallway). All models are wall mounted.
They are unflued and are not suitable for; bedrooms, bathrooms, toilets, saunas, or spa rooms.
Gas type
Available in NG or LPG, gas type specified at time of purchase. Heater is unable to be converted.
General clearance information
The recommended clearance for installation is 100 mm from the floor and a 150 mm clearance from the side panels. The heater is not designed to be built-in.
Do not install the heater:
3.2-5.3 MJ/h
0.9-1.4 kW
Aeromatic single entry
Left hand side of the front panel
Tangential 40 mm
3/8 " BSP flare fitting with nut, will fit 10 mm O.D copper pipe
Piezo ignition
1.05 mm
Multi-functional gas control valve with variable heat settings, incorporating a fan switch (800TF), flame failure device, gas regulator, and Piezo ignition
Manual
0.98 kPa
6.5 kg
April 2013
The Healthy Homes Standards in New Zealand were set in 2019 to protect tenants with requirements for heating and insulation. How can you make sure your house complies with the healthy home standards? Learn it all in our guide here.
Read Article
This article clarifies some of your frequently asked questions amidst all the confusion about the future of gas.
Read Article
If you’ve ever worked in an office environment, or you battle with a spouse over who gets control of the Heat Pump controller, you will be no stranger to how uncomfortable your home can be when the temperature isn’t quite right.
Read Article
