High efficiency power flued heater with programmable timers. Unit discharges warm air through louvres located at the base of unit. This means the room heats quickly as warm air is directed out into the room and not straight up.
Suitable for
Residential heating appliance suitable for open plan areas such as living rooms, and bedrooms. Can heat up to 35 m2 (depending on geographical location).
White*
5-12.6
MJ/h
3
kW
85
%
Available in NG and LPG, gas type specified at time of purchase
Stainless steel bunsen burner
Logic controlled 8-speed modulating fan. Air discharge through bottom louvres.
15 mm BSP male thread
Capacity 0.8 litres
Automatic ignition (continuous spark)
31-37 dB(A)
Touch sensitive electronic control pad, remote control, set and forget dual timer.
30-39 W (low to high)
16-26 °C by 1 ºC increments
Flame failure (flame rod), overheat (bi-metal switch, thermal fuse, thermistor), power failure (PCB), power fuse (3 A fuse), and fan delay (microcomputer timer)
17 kg
1998
2011, superseded by 309FT model
The Healthy Homes Standards in New Zealand were set in 2019 to protect tenants with requirements for heating and insulation. How can you make sure your house complies with the healthy home standards? Learn it all in our guide here.
Read Article
This article clarifies some of your frequently asked questions amidst all the confusion about the future of gas.
Read Article
If you’ve ever worked in an office environment, or you battle with a spouse over who gets control of the Heat Pump controller, you will be no stranger to how uncomfortable your home can be when the temperature isn’t quite right.
Read Article
