Discontinued Product, please contact 0800 RINNAI for more information

Discontinued Product, please contact 0800 RINNAI for more information

Rinnai Energysaver 1001FT

Rinnai Energysaver 1001FT


Spare parts and conversion are no longer available for this heater.
Information such as the operating and installation instructions, specification information, and servicing information (in some cases) is still available to support existing installed models.

High efficiency power flued convection heater supported by electronic timers and controls.

• 3-step automatic heat control with electronic thermostat
• low level warm air discharge to ensure even heat distribution
• modulating fan selects the ideal fan speed
• 12-hour delayed start timer
• can be connected to a centralised timer system (for schools, offices. etc.)
• humidifier tray 

Suitable for
Commercial applications such as offices, shops, classrooms etc. Can heat up to 106 m² (depending on geographical location in NZ).

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

General clearances
The appliance must not be built-in.

Input: 14.5-38 MJ/h
Output: 3.42-8.79 kW
Efficiency: Approx. 85%


Air Volume Heated air volume 5.0-8.1 m³/min
Combustion System Forced combustion with stainless steel burner
Fan Type Modulating 6-speed centrifugal fan
Gas Connection R½ 15 mm BSP male thread
Humidifier Tray Capacity approx. three litres, evapouration rate 300 cc/h
Ignition System Automatic ignition (continuous spark)
Noise Level 35-46 dB(A)
Operation • Electronic push button on/off
• Slide control thermostat and timer
Safety Devices Overheat switch, thermal fuse, flame failure, fan switch, power failure, air pressure, power surge, and pre-ignition.
Temperature Control Electronic thermostat
Temperature Range 12.5 ° C ± 3 °C (low)
35.0 ° C ± 7 °C (high)
Differential of 1.5 ± 0.5 °C
Timer Operation 12 hour delay slide operated timer (morning or evening heating)
Weight 41 kg
Market Release 1992
Discontinued 2001
Obsolete Dec 2009


All dimensions are in mm.

Ducted Gas Heating Service Centre

Ducted Gas Heating Service Centre
Operating 5 days a week, 8am to 5pm, Monday to Friday our New Zealand based customer service centre provides nothing but top quality. If you need to book in a Ducted Gas Heating service, we have a team of providers fully trained and equipped with diagnostic tools to service your appliance when you need them. 

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message