Discontinued Product, please contact 0800 RINNAI for more information

Discontinued Product, please contact 0800 RINNAI for more information

Rinnai Reflection Advance ETR

Rinnai Reflection Advance ETR


The perfect option to reinvigorate an unused or existing masonry fireplace

With an engine sized specifically to slot onto an existing masonry chimney, the Reflection Advance ETR is the perfect renovation solution.

Operated by an electronic timer control (ETR), the Reflection Advance comes in two colour options:

  • Galaxy Black
  • Dark Bronze

Due to the customisable options avaiable the Reflection range does not come as a complete unit. You need to select the various components to suit the installation.

Suitable for
The Reflection Advance ETR is a domestic heating appliance suitable for living rooms and open plan areas. Designed to be installed into an existing masonry installation.

Heating area
Can heat up to 84 m² (depending on where you live).

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

General clearances

Input: 11-30 MJ/h
Output (no flexiliner flue): 2.4-6.6 kW
Output (flexiliner flue): 2.3-6.6 kW
Efficiency: 75-79% (dependent on flueing)
Energy Star Rating up to 4.0 stars (dependent on flueing)

Burner Ceramic logs and ember bed
Combustion System Yellow flame bunsen multi port burner
Data Plate Bottom panel, front right hand side
Fan Type Tangential 2-speed (high and low), rating 90 W
Flue - Masonry For existing masonry installations, to ensure adequate draw of the appliance, Rinnai strongly recommends the use of a Rinnai Flexiliner Flue System. Failure to meet this criteria may result in an unsafe situation. Installation without a flexiliner flue is permissable as long as the chimney is checked  for soundness and ability to achieve a good draw.
Gas Control Electronic control valve
Gas Connection ½ "BSPT male thread
Ignition System Electronic continuous spark discharge to inermittent pilot by either remote or push button method
Noise Level Estimated 53 dB(A) with fan on high
Power Consumption High 60 W, low 35 W, standbyPower cord is located lower right hand side of heater
Safety Devices Overheat switches, flame failure sensing system, thermal fuse, overcurrent fuse, and spark detector
Weight 50 kg
Market Release 2008
Discontinued March 2013

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Request a Service

*Request* a Service
At Rinnai NZ,  adding a touch of magic to life’s daily pleasures is what we are all about so that people can get on with the more complicated challenges in life.  Rinnai makes daily routines, like taking a hot shower or heating your home, simple, enjoyable and stress-free.  

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message