Discontinued Product, please contact 0800 RINNAI for more information

Discontinued Product, please contact 0800 RINNAI for more information

Rinnai Infinity XR16i V16 Internal (REU-V1616WF)

Rinnai Infinity XR16i V16 Internal (REU-V1616WF)


Temperature controlled continuous flow gas hot water system for internal domestic applications. The XR16i and V16 internal is a fan assisted appliance that requires air from the room for combustion—switches off after one hour of continued use.

Suitable for
• internal domestic installations
• apartments or homes with one bathroom
• mains and low pressure systems
Hard or acidic water will need to be treated in order to use this product.

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

Colour: White
Input: 125 MJ/h or 34.7 kW (max.)
Output: 28 kW
Efficiency: 81%
REU Number: V1616WF


Capacity Hot water capacity: 2.4 to 16 litres per minute
Nominal water capacity: 16 litres per minute at a 25 °C rise (960 L/h)
Connections Hot water oulet: R½ 15A (left)
Cold water inlet: R½ 15A (centre)
Gas supply: R¾ 20A (right)
Flue Single skin flued appliance
Ignition System Direct electronic ignition
Line Pressure (min.) NG: 1.13 kPa,    LPG: 2.75 kPa
Line Pressure (max.)

3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa).

In the case of commercial metering (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming line pressure down.

Power Consumption Normal: 65 W
Standby: 6 W
Automatic Frost Protection: 74 W
Pressure Relief Valve opens at 2060 kPa, valve closes at 1470 kPa
Noise Level 49 dB(A)
Water Supply Nominal operating pressure: 100-830 kPa
Minimum water flow: 2.4 litres per minute
Weight 16 kg
Market Release 2004
Discontinued 2007

Ducted Gas Heating Service Centre

Ducted Gas Heating Service Centre
Operating 5 days a week, 8am to 5pm, Monday to Friday our New Zealand based customer service centre provides nothing but top quality. If you need to book in a Ducted Gas Heating service, we have a team of providers fully trained and equipped with diagnostic tools to service your appliance when you need them. 

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message