RRP $8,599 *Above RRP is for the single-sided model. Double-sided $9,499. RRP includes the engine and burn media, it does not include flueing.
For Rinnai's latest range of premium gas fires, the Linear Collection, Rinnai’s designers took their inspiration from Aotearoa’s unique landscapes. They hand selected driftwood washed up on our wild West Coast beaches, and stones to match those shaped by our rivers and tides. These were painstakingly recreated as perfectly lifelike ceramics.
Rinnai’s engineers then reinvented gas fire technology so flames burn more realistically and embers glow more brightly. Finally, they captured the flames in frameless panoramic enclosures, leaving next to nothing between you and the flickering warmth. The end result is the all-new Linear gas fire collection from Rinnai.
Sitting right in the middle of the Linear collection, this beautifully proportioned fire will become the focal point for any room. Its generous one metre width gives it plenty of presence, as well as plenty of heat to warm your home.
All fires in the Linear Collection are available in both single and double-sided variants.
Indoor installations only.
Living rooms and open plan areas. The versatile power flue system makes for easy installation in almost any living space, including bedrooms.
• Upper North Island, up to 118 m²
• Central and Lower North Island, up to 82 m²
• South Island, up to 69 m²
Available for Natural Gas or LPG, specify at the time of purchase.
General clearances around the Linear when operating
The Linear must not be installed where curtains or other combustible materials (coffee tables, couches etc.) could come into contact with it. In some cases curtains may need restraining. The 400 mm side clearance includes side walls. The 1000 mm clearance is in front of the fire.
|Convection fan||2-speed fan. Heat is distributed from the top of the appliance.|
|Data plate||Base of the combustion chamber, LHS, on the convection fan access panel|
|Gas connection||½ " BSP, the gas supply terminates inside the heater—lower left hand side|
|Ignition||Continuous spark electronic ignition.|
|Noise level||37-45 dB(A)|
|Flue||Power flue. Inner 50 mm, outer 70-80 mm. Appliance MUST be installed with a Rinnai flue system.|
• High 50 W
• Standby less than 8 W
The Linear has a 1.5 m cord with a three pin plug supplied. The power cord passes through a slot in the right hand side of the appliance.
|Safety devices||Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detector.|
The Linear can be operated using the basic infra-red remote, or for more features, such as timers and thermostatic control, using Rinnai's Wi-Fi fireplace controller app.
ES: Supplier Declaration of Compliance
|Market release||July 2019|
Glass dimension: 1000 x 280 mm