Discontinued Product, please contact 0800 RINNAI for more information

Discontinued Product, please contact 0800 RINNAI for more information

Rinnai Infinity VTa26 External (REU-Vr2626WGT)


Rinnai Infinity VTa26 External (REU-Vr2626WGT)

Specially designed for aggressive water areas (such as Christchurch)
Temperature controlled continuous flow gas hot water system for external domestic applications. .

Hot water capacity
1.8 to 26 litres per minute.

Continuous flow hot water
This type of hot water system produces endless hot water. Continuous flow is a very energy efficient water heating system, because it's only on when you need hot water.

Suitable for
• Aggressive water areas (such as Christchurch)
• External domestic installations
• High simulatenous hot water demand applications (homes with 1-2 bathrooms)
• Mains and low pressure systems
• Solar installations as a gas boost

Hard or acidic water will need to be treated to use this product.

Gas type
LPG only

General clearances
The following diagram has been provided to assist you in determining where (and if) an external continuous flow water heater can be positioned. If in doubt, prior to purchase, consult a licensed gasfitter.

REU Number: REU-VR2626WGT
Colour: White
Input: 199 MJ/h or 55 kW
Output: 44.2 kW
Efficiency: 80%
Energy Star Rating: 5.8 stars
Factory Preset Temperature: 55 °C


 

Capacity Hot water capacity: 1.8 to 26 litres per minute
Nominal water capacity: 26 litres per minute at a 25 °C rise (1560 L/h)
Connections Hot water outlet: R¾ (20 mm)
Cold water inlet: R¾ (20 mm)
Gas supply: R¾ (20 mm)
Exhaust System Forced flue
Frost Protection Fitted as standard.
Frost protection operates automatically, as long as the appliance is connected to the electrical power supply, by activating when the temperature inside the unit drops below 3.5 °C, and turns off once the temperature inside the unit reaches 7 °C.
Ignition System Direct electronic ignition
Injector Size NG: 1.0, 1.55
LPG: 0.7, 1.05
Line Pressure (min.) NG: 1.13 kPa, LPG 2.75 kPa
Line Presure (max.)

3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa).

In the case of commercial metering, (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming pressure down).
 

Power Consumption Normal: 54 W (NG), 59 W (LPG), Standby: 2 W,
Automatic Frost Protection: 125 W
Pressure Relief Valve opens at 2060 kPa, valve closes at 1479 kPa
Noise Level 50 dB(A)
NOx af Less than 60 ppm
Safety Devices Flame failure, boil-dry protection, overheat protection, fusible link, pressure relief valve and combustion fan rpm check
Water Supply Nominal operating pressure: 130-1000 kPa
Activation flow rate: 2.4 litres per minute
Weight 17 kg
Compliance ESS: Supplier Declaration of Compliance
• Declaration Number: 12409201012
• Certificate Number: 6930
Market Release 2011

A Width 350 mm
B Depth 194 mm
C Height - unit 530 mm
D Height including brackets 571 mm
E Hot water outlet (from wall) 87 mm
F Hot water outlet (from centre) 105 mm
G Cold water inlet (from wall) 68 mm
H Cold water inlet (from centre) 10 mm
I Gas connection (from wall) 77 mm
J Gas connection (from centre) 83 mm
K Condensate outlet (from wall)
L Condensate outlet (from centre)
M Gas: Length gas connection (from base)
Cold: Length of cold water inlet (from base)
Hot: Length of hot water outlet (from base)
40 mm
50 mm
39 mm

Rinnai Infinity VTa26 External (REU-Vr2626WGT)

Compare this...

Compare this

... to other great products

Gas Hot Water

*Gas* Hot Water

Save 50% over electric with Infinity VT*

Get Rinnai INFINITY ® VT Gas Hot Water at home.


*15% in areas using LPG

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message

Brochures & Manuals