Discontinued Product, please contact 0800 RINNAI for more information

Discontinued Product, please contact 0800 RINNAI for more information

Timberflame Compact (IBF)

Timberflame Compact (IBF)

Discontinued March 2014 - superseded by the Compact 2

For sheer versatility and great looks, it is hard to beat.

The Rinnai Timberflame Compact is our most popular small fire. Deliberately designed to get into those tighter spaces, whether it's an existing masonry fireplace or an in-wall installation in a smaller living space. Available in matt black steel. 


Suitable for
Domestic heating appliance suitable for living rooms and open plan areas.

Heating area
Can heat up to 78 m² (depending on where you live).

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

General clearances


9-25 MJ/h


1.6-5.0 kW



Energy Star Rating


Burner Ceramic logs and ember bed
Combustion System Yellow flame bunsen multi port burner
Data Plate Inside the appliance on the front right hand side panel
Fan Type Tangential 2-speed, rating 28 W
Flue - Masonry

For existing masonry installations, to ensure adequate draw of the appliance, Rinnai strongly recommends the use of a Rinnai Flexiliner Flue System. Failure to meet this criteria may result in an unsafe situation. Installation without a flexiliner flue is permissable as long as the chimney is checked  for soundness and ability to achieve a good draw.

Terminal 43 x 245 mm rear discharge (spigot)

Flue - Decorative

Natutal draft twin skin flue. Termination, an approved 100 mm cowl must be fitted to all installations.

Decorative chimney installations requires a Zero Clearance Box and Zero Clearance Flue Kit. Flue dimensions: inner = 100 mm, outer = 150 mm

 Gas Control  Push button combination control valve
 Gas Connection ½  " BSP male flare to barrel union
 Ignition System  Electronic continuous spark discharge to intermittent pilot by push button method
Noise Level 45 dB(A)
Power Consumption High 80 W, standby 4 W
Power cord is located lower right hand side of the heater
Weight 39 kg
Compliance ES: Supplier Declaration of Compliance
• Declaration Number - Rin3152a
 Discontinued March 2014

Ducted Gas Heating Service Centre

Ducted Gas Heating Service Centre
Operating 5 days a week, 8am to 5pm, Monday to Friday our New Zealand based customer service centre provides nothing but top quality. If you need to book in a Ducted Gas Heating service, we have a team of providers fully trained and equipped with diagnostic tools to service your appliance when you need them. 

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message