Discontinued Product, please contact 0800 RINNAI for more information

Discontinued Product, please contact 0800 RINNAI for more information

Rinnai REU-55FT

Rinnai REU-55FT


The REU-55FT is a mulitpoint, wall mounted water heating system suited for smaller applications. It is compact, easy to install, has an automatic electronic ignition system and temperature selector.

For use as a multipoint, a flue must be installed.

Additional features
• Flame control selector
• Flame failure safety device
• Oxygen depletion pilot system

Safe and economical working life of the appliance
Depending on the operating environment, frequency of operation, water and gas quality, the appliance would not be expected to be used in excess of ten years. Some parts such as burner and heat exchangers degrade, and the appliance will no longer be burning as cleanly as when it was new.

The date of manufacture is indicated on the data plate of the appliance. Ten years after this date, the appliance should be decommissioned and disposed of.

Typically used in smaller applications (baches, caravans etc.).

Gas type
LPG only—unable to be converted.

Colour: White
Hot water capacity: 2.5-5 litres per minute at a 25 ° rise (300 L/h)
Input: 21-40 MJ/h
Thermal efficiency: 79%


Burner Bunsen
Connections Gas: R½ (15A)
Water inlet: R½ (15A)
Hot water outlet: R½ (15A)
Ignition System Continuous charge direct ignition
Minimum Operating Water Pressure 34.3 kPa
Noise Level 46 dB(A)
Temperature Control Can be adjusted by turning the temperature selector to a suitable position between 'Hi'and 'Lo'
Safety Devices • Flame failure safety device
• Incomplete combustion prevention safety device
• Extra safety timer device
Weight 6.2 kg
Market Release Approx. 2002

Height 370 mm
Width 290 mm
Depth 132 mm

Ducted Gas Heating Service Centre

Ducted Gas Heating Service Centre
Operating 5 days a week, 8am to 5pm, Monday to Friday our New Zealand based customer service centre provides nothing but top quality. If you need to book in a Ducted Gas Heating service, we have a team of providers fully trained and equipped with diagnostic tools to service your appliance when you need them. 

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message