Discontinued Product, please contact 0800 RINNAI for more information

Discontinued Product, please contact 0800 RINNAI for more information

Rinnai Timberflame IB30

Rinnai Timberflame IB30


The Rinnai Timberflame IB30 is an inbuilt gas fire ideal for living areas. It combines the cosy comfort of a log fire and the heating efficiency of gas.

• Standard dimensions to fit into most existing fireplaces
• Burner system allows you to turn down the heat while maintaining the full theatre of flame
• Realistic flame pattern for warmth and true fire ambience
• Electronic push button
• Two speed convection fan ensuring even heat over a large area
• Easy to install conventional flue system

Suitable for
Domestic heating appliance suitable for living rooms and open plan areas.

Heating area
Can heat up to 78 m² (depending on where you live).

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

General clearances

Input: 30 MJ/h
Output: 6 kW ( on high) and 3 kW (on low)
Colour: Black with gold trim (optional extra silver trim available)

Burner Ceramic logs, ember bed and heat burner
Data Plate Bottom right hand side of panel
Fan Type Tangential 2-speed, rating 90 W
Flue Termination An approved 100 mm cowl must be fitted to all installations
Flue Type Natural draft (twin skin)
Gas Control Rinnai push button combination control
Gas Inlet 15 mm copper flare connection
Injector Size Front burner: 1.30 (NG) and 0.80 (LPG)
Centre burner: 1.75 NG and 1.15 (LPG)
Rear burner: 1.30 NG and 0.80 (LPG)
Ignition System Electronic spark
Line Pressure  1.5 kPa (NG) and 2.75 kPa (LPG)
Power Supply 230/240 V, 50 Hz, unit is supplied with a 3-pin plug and supply lead
Test Point Pressure 0.95 kPa (NG) and 2.20 kPa (LPG)
Weight 40 kg
Market Release 1998
Discontinued 2004

Fascia Dimensions (mm): H-635, W-830, D-170
Fire Box Dimensions (mm): H-580, W-585, D-265
Masonry Fireplace Opening (mm): H-595, W-600, D-270
Rinnai Timberflame IB30

Ducted Gas Heating Service Centre

Ducted Gas Heating Service Centre
Operating 5 days a week, 8am to 5pm, Monday to Friday our New Zealand based customer service centre provides nothing but top quality. If you need to book in a Ducted Gas Heating service, we have a team of providers fully trained and equipped with diagnostic tools to service your appliance when you need them. 

Architects Portal

*Architects* Portal

Are you an Architect, Designer or Specifier?

We have everything you need to support your design process including CAD & BIM content. Check out everything you need from one easy Architects and Designers portal.

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message