Evolve 952 with simple remote


RRP $6,622 *Includes engine ($5615), frame ($758), and log set burn media ($249)

Rinnai Evolve 951 with simple remote

Design your own with modern burn media or traditional logs and a choice of two frames, use our 'Customise your fire' feature below.

With up to 8.1 kW of heat output, the Evolve 952 gas fire can easily heat up to 125 m². What's more, with the Rinnai power flue system the fire can be installed where other fires cannot go.

Back to basics—the simple infra-red remote makes operation easy and stress-free.

Made in NZ

Suitable for
Living rooms and open plan areas. The versatile power flue system makes for easy installation in almost any living space, including bedrooms.

Heating areas (up to)
- Upper North Island 125 m²
- Central and lower North Island 111 m²
- South Island 82 m²

Gas type
Available for Natural Gas or LPG, specify gas type at time of purchase. 

General clearances around the Evolve when operating
The appliance must not be installed where curtains or other combustible material (coffee tables, couches etc.) could come into contact with it. In some cases curtains may need restraining. The 400 mm side clearance includes side walls. The 1000 mm clearance is in front of the fire.

Evolve 952 clearances

Input

10-34 MJ/h

Output

2.4-8.1 kW*

Efficiency

86%
Data plate Located inside the appliance, upper right hand side.
Convection fan 3-speed fan. Heat is distributed from the top of the appliance.
Gas connection ½ " BSP, the gas supply terminates inside the heater—lower left hand side of the appliance.
Ignition Continuous spark electronic ignition
Noise level 37-45 dB(A)
Power flue Inner 50 mm, outer 70-80 mm. Appliance must be installed with a Rinnai flue system.
Power consumption and electrical supply High 90 W, standby < 8 W.
This heater has a 1.5 m power cord with a 3-pin plug supplied. The power cord passes through a slot in the back left hand corner of the appliance.
Safety devices Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detector.
Temperature control

Once the fire is turned on the infra-read remote* is used to control the flame height and heat output. If the remote is not used the Evolve will automatically modulate between the burner settings to maintain the deafult set temperature of 22 °C.


* Temperature sensor is located in the bottom of the remote.
Weight 75 kg
Compliance Supplier declaration of compliance:
Declaration number - 18424201712
Market release February 2018
* kW output and energy star rating will vary according to gas type and flue configuration

Rinnai Evolve Evolve 952 dimensions diagram
 

Accessories

Evolve 951/952 mesh guard (R2778)

Evolve 951 mesh guard (R2778)
This accessory kit, ideally ordered at the time of purchasing the unit, is designed to protect against touching the hot surface of the glass.

Customise your fire

Choose from the options below:

Fireplace preview

Frame

Burn Media

Try before you buy!

Just press the magic button!

If you have an iPhone/iPad or Android phone simply follow the instructions below to see what a Rinnai gas fireplace looks like in your home.

more
Try before you buy!

Don't have a smartphone?

Just use one of our life-sized fireplace posters. You can order online or pick one up at any Rinnai showroom.

Order now
Don't have a smartphone?

Compare this...

Compare this

... to other great products

See it in action

See it in action

See or view this product

Enquire about a product

We’re happy to help with anything, big or small. Please fill out the short form below and we’ll get back to you within 24 hours.

Please enter your name Please enter your email address Please enter a subject Please enter a message

Where to Buy

Find a Rinnai reseller near you:

Or enter a postcode:

Brochures & Manuals